Industrial Exhaust Fan- 415V - 3 Phase - 710 mm (Diameter)
Open For Business & Shipping Daily During COVID-19
Industrial Exhaust Fan - 415V - 3 Phase - 710 mm (Diameter)
The industrial exhaust fan has a 710 mm fan diameter and an air volume of 295 m3/min. The blades are made from stainless steel, the push-pull ligature is made from nylon, and the frame and shutter are made from anti-corrosive galvanized steel. The fan is powered by a 415 volt motor that has a maximum speed of 560 revolutions per minute.
The fan has an electric motor that allows the unit to pull air in through the grill, which it then propels out with force. The fan's ligature is a push-pull centrifugal device that opens the shutter at a 90 degree angle to provide the lowest possible air resistance and the largest possible air volume, and closes the shutter when the fan is off. There is no speed controller. The easy installation of this fan makes it simple to maximize output.
The fan is designed for use in textile factories, food processing facilities, supermarkets, commercial farms, greenhouses and other applications in industrial, commercial and agricultural sites.
|Certifications:||SAA, SGS, CE, BV|
|Fan Speed:||560 rpm|
|Air Volume:||295 m3/min|
|Air Pressure:||55 Pa|
|Noise:||less than 65 dB|
|Voltage:||415V (three phase)|
Do you have a question about this product?
Receive $5 off your purchase simply for asking a question! Ask us anything! In fact, we use questions asked on our website about our products to further inform future customers, so we want you to leave a question. In addition, you will automatically be entered in our monthly $100 giveaway when you ask a question! Click for details »
If you need an answer to your question immediately, please call our friendly